Care & Cleaning Instructions
Rosebud MFG. recommends for its products:
Use liquid cleaner such as window cleaner or any such non-abrasive cleaner for regular cleaning to remove mineral deposits and soap scum. Restore dull surfaces by using liquid cleaning compound (such as is used for cars), followed by a light application of liquid wax or paste. Do not use abrasive cleaners, steel wool, scouring pads, scrapers, or sandpaper on any part of the surfaces. Occasionally, Gel Gloss (available in most major hardware stores) is an excellent way to clean and seal your cultured marble vanity tops for years of beauty.
To remove built up hair spray, paint tar, and difficult stains from the surface, use turpentine, denatured alcohol, or paint thinner. Be careful not to use turpentine or paint thinner on the hydro jets in a spa or plated components - damage to the plastic coatings may result.
To remove plaster or construction residue, scrape the surface slightly with a wooden edge and wash with liquid detergent. Never use wire brushes or metal tools on any part of the cultured marble surfaces.
If the stain is from hard water or mineral deposits, try using a cleaner for removing iron, calcium, or other such mineral deposits that are in your water supply. Most cleaning chemicals will not damage the gel coat as long as label instructions are followed.
DO NOT use water heated over 135 degrees.
Copyright 2014 by Rosebud Manufacturing Privacy StatementTerms Of Use Dealers